Description

• Except the air and water, dont attempt to use the fittings on other fluids.
• The tube fitting is prohibited where spark and fire might be occurred.
• The tube fitting is prohibited if water temperature is above 60 degrees celsius.
• Never apply tube joint with additional external load (bending, twist or
  pulling), otherwise damage or leakage will be occurred.
• Check the end of tubing for a right angle cutting and check the external surface of
  tubing for any damage or scratch.
• Please refer to following instruction when you insert the air tubing into the joint, you will have two-step feeling.

1. Section one is locking claw.
2. Section two is sealing ring.

• Must insert tube into section two.
• Sleeve is used in tubing connection and disconnection.
• After connection of tube joint and tubing, always try to pull tubing and ensure
  its firm connection.
• Always use proper tool to tighten external hexagonal and internal hexagonal parts of
  the tube fitting.
• Always apply recommended torque on screws otherwise extra torque
  might damage thread and cause air leakage while insufficient torque might cause
  loose screws and air leakage.
• After Screws are tightened,you may adjust the direction of tubing with most of our
  tube joint.
• If it is hard in adjustment,you may apply recommended torque to turn
  screw to adjust direction of tubing.